Screw Clamp Terminal Blocks
A perfect solution for extremely compact wiring applications, these terminal block are modular and can be stacked to form multi-pole terminal block assemblies.
A perfect solution for extremely compact wiring applications, these terminal block are modular and can be stacked to form multi-pole terminal block assemblies.
This user friendly connnector with its easy push in spring clamp connection technology also offers an in built continuity test point above the cable entry.
The design of the terminal block is such that it helps in connection of a fork or ring type lugs. The range includes Terminal Blocks for wire sizes from 16 sq.mm to 120 sq.mm.
A perfect solution for extremely compact wiring applications, these terminal block are modular and can be stacked to form multi-pole terminal block assemblies.
PCB terminal blocks enable the easy and safe transmission of signals, data, and power directly to the PCB. The space-saving connection method is suitable.
We are instrumental in offering a wide range of PCB Pluggable Connector. Our PCB Terminal blocks are available in two basic orientations.
Din Rail for mounting Terminal Blocks and Interface modules. Most of Connectwell's Terminal Blocks and Interface Modules are designed to be mounted on Din Rails.
Banking on the skills of our qualified team of professionals, we are instrumental in offering a supreme quality range of Connectwell Connector Terminal Block.
Relay Module For Industrial Suitability, Switching Current upto 10A at 230VAC (or 30VDC), Low Coil Drive Current (4.7 mA to 100 mA) & Easy to replace Pluggable Relays.
The most common application of solid state relays is in the switching of an AC load, whether that is to control the AC power for ON/OFF switching.
These devices display qualities such as reduced thermal resistance, low tail current, low energy loss, and high-speed switching capability of our device.
Digital input modules sense voltages as high as those on AC mains and convert them to TTL-level signals that measurement equipment can safely detect.
Passive devices are main components used in electronics such as resistors, inductors which together are required to build any electrical or electronic circuit.
protection module is an electronic unit that monitors the functions of your compressor motor while it is in operation.Moduel is operating outside of its normal parameters.
These modules provide connection possibility for both the input and output side of a PLC in a single module and are from Fanuc, GE, Mitsubishi, Schneider & Siemens.
Pluggable Solid State Relay(SSR), Easy to replace maintenance purpose, Switching current capacity up to 2 Amp, Module 1NO (SPST) 5VDC IN 400VAC.
Switching Mode Power Supply (SMPS) has become a standard type of power supply, electronic devices because of their high efficiency, low cost and high power density.
Din Rail Mountable Step Type Switching Power Supplies. Full Range Input selection from 90 to 264VAC, Compact design with a width of only 18mm.
A redundancy module is used to decouple two power supplies and ensures the high availability and productivity of your system. with stringent operational safety.
Diode Oring Modules are used when Two SMPS are connected in Parallel (Redundancy), available in 10 Amp / 20 Amp /40 Amp/ 70 Amp. The PIV of Diodes are 1200V.
Connectwell DIN Rail mounted socket and switches offer a unique possibility of mounting an Industrial Socket and Switch on a standard DIN rail.
Din Rail Sockets are available for various country standard plugs. These need to be wired and snapped inside the Din rail mounting frame.
This assembly then easily snaps on to a standard DIN rail.These need to be wired and snapped inside the Din rail mounting frame as shown in the assembly diagram below.
A unique possibility of mounting an Industrial Socket and Switch on a standard DIN rail mounted socket and switches of Connectwell DIN Rail.
